Product comparison · 2 wireless access points

Allied Telesis AT-MWS600AP 1950R vs Allied Telesis MWS600AP 300 Mbit/s White Power over Ethernet (PoE)

Add a product
  • 30specifications compared
  • 1differ
  • 29identical
  • 0known for one product only

Side by side

Differences highlightedShow differences only (off)
Comparison of AT-MWS600AP 1950R, MWS600AP
30 specifications
Featuresidentical
2.4 GHzYesYes
5 GHzYesYes
Maximum data transfer rate300 Mbit/s300 Mbit/s
Wi-Fi data rate (max)300 Mbit/s300 Mbit/s
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ad, IEEE 802.11az, IEEE 802.11nIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ad, IEEE 802.11az, IEEE 802.11n
Automatic channel selectionYesYes
Modulation16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Quality of Service (QoS) supportYesYes
Security1 differ
Security algorithmsDiffers64-bit WEP, 128-bit WEP, 152-bit WEP, 802.1x RADIUS, EAP-FAST, EAP-SIM, EAP-TLS, MSCHAPv2, PEAP, WPA, WPA-AES, WPA-TKIP, WPA2, WPA2-AES, WPA2-TKIP64-bit WEP, 128-bit WEP, 152-bit WEP, 802.1x RADIUS, EAP-AKA, EAP-FAST, EAP-SIM, EAP-TLS, MSCHAPv2, PEAP, WPA, WPA-AES, WPA-TKIP, WPA2, WPA2-AES, WPA2-TKIP
Service Set Identifier (SSID) featuresSSID broadcast on/offSSID broadcast on/off
Management featuresidentical
SyslogYesYes
Firmware upgradeableYesYes
Ports & interfacesidentical
Ethernet LAN (RJ-45) ports11
USB 2.0 ports quantity00
DC-in jackYesYes
Poweridentical
Power over Ethernet (PoE)YesYes
Power consumption (typical)11 W11 W
Heat dissipation37.92 BTU/h37.92 BTU/h
Designidentical
PlacementCeiling, Table, WallCeiling, Table, Wall
Product colourWhiteWhite
LED indicatorsYesYes
InternalNoNo
Weight & dimensionsidentical
Width161.2 mm161.2 mm
Depth161.2 mm161.2 mm
Height38 mm38 mm
Weight280 g280 g
Operational conditionsidentical
Operating relative humidity (H-H)5 - 90%5 - 90%
Operating temperature (T-T)0 - 50 °C0 - 50 °C
Storage temperature (T-T)-40 - 70 °C-40 - 70 °C
Storage relative humidity (H-H)5 - 95%5 - 95%

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More wireless access point comparisons

All wireless access point comparisons