Product comparison · 2 uninterruptible power supplies (upss)

AEG Protect A vs AEG Protect C

Key differences

Output power capacity
- Protect A:0.5 kVA
- Protect C:1 kVA
Output power
- Protect A:300 W
- Protect C:700 W
Maximum current
- Protect A:2.2 A
- Protect C:7 A
Noise level
- Protect A:40 dB
- Protect C:45 dB
Battery recharge time
- Protect A:8 h
- Protect C:5 h
Weight
- Protect A:6 kg
- Protect C:15 kg
Interface
- Protect A:USB, RS-232
- Protect C:RS-232
Dimensions (WxDxH)
- Protect A:100 x 330 x 140 mm
- Protect C:145 x 400 x 220 mm

Differences highlightedShow differences only

Comparison of Protect A, Protect C
24 specifications	A AEG Protect A View product	B AEG Protect C View product
Features4 differ
Output power capacityDiffers	0.5 kVA	1 kVA
Output powerDiffers	300 W	700 W
Maximum currentDiffers	2.2 A	7 A
Emergency Power Off (EPO)	No	No
Noise levelDiffers	40 dB	45 dB
Ports & interfacesidentical
Number of output IEC jumpersKnown for one	Unknown — not stated by the source	4
Serial ports quantity	1	1
Modem (RJ-11) ports	1	1
Ethernet LAN (RJ-45) portsKnown for one	Unknown — not stated by the source	1
USB 2.0 ports quantityKnown for one	1	Unknown — not stated by the source
Battery1 differ
Typical backup time at full loadKnown for one	Unknown — not stated by the source	20 min
Typical backup time at half loadKnown for one	Unknown — not stated by the source	6 min
Battery recharge timeDiffers	8 h	5 h
Hot-swap batteryKnown for one	No	Unknown — not stated by the source
Designidentical
LED indicators	Yes	Yes
Operational conditionsidentical
Operating temperature (T-T)	0 - 40 °C	0 - 40 °C
Weight & dimensions1 differ
WeightDiffers	6 kg	15 kg
Other features2 differ
InterfaceDiffers	USB, RS-232	RS-232
Dimensions (WxDxH)Differs	100 x 330 x 140 mm	145 x 400 x 220 mm
Mac compatibility	Yes	Yes
Networking featuresKnown for one	Unknown — not stated by the source	10/100 Mbit/s
Output voltage noteKnown for one	Unknown — not stated by the source	36 Vdc
Electrical output connections	4x IEC 320 C13	4x IEC 320 C13
Non-operating relative humidity (non-condensing)	0 - 90%	0 - 90%

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.