Product comparison · 2 raid controllers

ASUS PIKE II 3108-8i/16PD vs GIGABYTE CSA4648 RAID controller PCI 3.0 12 Gbit/s

Add a product
  • 6specifications compared
  • 3differ
  • 3identical
  • 10known for one product only

Key differences

The GIGABYTE CSA4648 RAID controller PCI 3.0 12 Gbit/s has 13.6 mm more height than the ASUS PIKE II 3108-8i/16PD (64.4 mm vs 50.8 mm). Supported storage drive interfaces: SAS, Serial ATA II, Serial ATA III on the ASUS PIKE II 3108-8i/16PD, SAS on the GIGABYTE CSA4648 RAID controller PCI 3.0 12 Gbit/s. Host interface: PCI Express on the ASUS PIKE II 3108-8i/16PD, PCI on the GIGABYTE CSA4648 RAID controller PCI 3.0 12 Gbit/s.

  • Host interface
    • PIKE II 3108-8i/16PD:PCI Express
    • CSA4648 RAID controller PCI 3.0 12 Gbit/s:PCI
  • Height
    • PIKE II 3108-8i/16PD:50.8 mm
    • CSA4648 RAID controller PCI 3.0 12 Gbit/s:64.4 mm

Side by side

Differences highlightedShow differences only (off)
Comparison of PIKE II 3108-8i/16PD, CSA4648
16 specifications
Ports & interfaces2 differ
Supported storage drive interfacesDiffersSAS, Serial ATA II, Serial ATA IIISAS
Host interfaceDiffersPCI ExpressPCI
PCI Express slots version3.03.0
Internal mini-SAS ports22
Internal SAS portsKnown for oneUnknown — not stated by the source8
Performanceidentical
RAID levelsKnown for one0, 1, 5, 6, 10, 50, 60Unknown — not stated by the source
Data transfer rate12 Gbit/s12 Gbit/s
Internal memoryKnown for one1000 MBUnknown — not stated by the source
ChipsetKnown for oneLSI SAS 3108Unknown — not stated by the source
Weight & dimensions1 differ
WidthKnown for one152.4 mmUnknown — not stated by the source
HeightDiffers50.8 mm64.4 mm
DepthKnown for oneUnknown — not stated by the source167.6 mm
Package widthKnown for oneUnknown — not stated by the source318 mm
Package depthKnown for oneUnknown — not stated by the source530 mm
Package heightKnown for oneUnknown — not stated by the source280 mm
Logistics dataidentical
Harmonized System (HS) codeKnown for one84733080Unknown — not stated by the source

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More raid controller comparisons

All raid controller comparisons