Product comparison · 2 network switches

Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays vs NETGEAR ProSafe GSM7248R

Add a product
  • 22specifications compared
  • 16differ
  • 6identical
  • 40known for one product only

Key differences

The NETGEAR ProSafe GSM7248R has 0.9 Gbit/s more maximum data transfer rate than the Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays (1 Gbit/s vs 0.1 Gbit/s). The Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays has 137,697 h more mean time between failures (MTBF) than the NETGEAR ProSafe GSM7248R (300000 h vs 162303 h). The Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays has 13.5 W more power consumption (typical) than the NETGEAR ProSafe GSM7248R (85 W vs 71.5 W). Switch layer: L3 on the Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays, L2 on the NETGEAR ProSafe GSM7248R. MIB support: Yes on the Allied Telesis NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays, RFC 1213 MIB II on the NETGEAR ProSafe GSM7248R.

  • Switch layer
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:L3
    • ProSafe GSM7248R:L2
  • MIB support
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:Yes
    • ProSafe GSM7248R:RFC 1213 MIB II
  • Maximum data transfer rate
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:0.1 Gbit/s
    • ProSafe GSM7248R:1 Gbit/s
  • Management protocols
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:SNMP
    • ProSafe GSM7248R:SNMP v1, v2c, v3
  • Mean time between failures (MTBF)
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:300000 h
    • ProSafe GSM7248R:162303 h
  • Power consumption (typical)
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:85 W
    • ProSafe GSM7248R:71.5 W
  • Dimensions (WxDxH)
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:440 x 440 x 44.5 mm
    • ProSafe GSM7248R:440 x 205 x 43 mm
  • Operating temperature (T-T)
    • NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays:0 - 50 °C
    • ProSafe GSM7248R:0 - 55 °C

Side by side

Differences highlightedShow differences only (on)
Comparison of NEBS-Compliant 10/100TX x 48 ports managed FE L3 Switch w/ 4x SFP expansion bays, ProSafe GSM7248R
62 specifications
Management features2 differ
Switch layerDiffersL3L2
Web-based managementKnown for oneUnknown — not stated by the sourceYes
System event logKnown for oneUnknown — not stated by the sourceYes
MIB supportDiffersYesRFC 1213 MIB II
Ports & interfacesidentical
Console portKnown for oneUnknown — not stated by the sourceRS-232
Combo SFP ports quantityKnown for one4Unknown — not stated by the source
SFP/SFP+ slots quantityKnown for one4Unknown — not stated by the source
Networkidentical
Copper ethernet cabling technologyKnown for oneUnknown — not stated by the source1000BASE-T, 100BASE-TX, 10BASE-T
Port mirroringKnown for oneUnknown — not stated by the sourceYes
Broadcast storm controlKnown for oneUnknown — not stated by the sourceYes
Flow control supportKnown for oneUnknown — not stated by the sourceYes
Link aggregationKnown for oneUnknown — not stated by the sourceYes
Rate limitingKnown for oneUnknown — not stated by the sourceYes
Networking standardsKnown for oneIEEE 802.1D, IEEE 802.1Q, IEEE 802.1v, IEEE 802.2, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3zUnknown — not stated by the source
Full duplexKnown for oneYesUnknown — not stated by the source
Data transmission1 differ
MAC address tableKnown for oneUnknown — not stated by the source9000 entries
Store-and-forwardKnown for oneUnknown — not stated by the sourceYes
Maximum data transfer rateDiffers0.1 Gbit/s1 Gbit/s
Jumbo frames supportKnown for oneUnknown — not stated by the sourceYes
Securityidentical
DHCP featuresKnown for oneUnknown — not stated by the sourceDHCP server
Access Control List (ACL)Known for oneUnknown — not stated by the sourceYes
Static port securityKnown for oneUnknown — not stated by the sourceYes
Security algorithmsKnown for one3DES, DES, MD5Unknown — not stated by the source
Multicast featuresidentical
Multicast supportKnown for oneUnknown — not stated by the sourceYes
Protocols1 differ
Management protocolsDiffersSNMPSNMP v1, v2c, v3
Supported network protocolsKnown for oneUnknown — not stated by the sourceSNTP
Design1 differ
SafetyDiffersUL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950, AS/NZS60950.1CE mark, EN 60950-1, UL/cUL 60950-1
Rack mountingKnown for oneYesUnknown — not stated by the source
Performance1 differ
Internal memoryKnown for oneUnknown — not stated by the source64 MB
Flash memoryKnown for oneUnknown — not stated by the source32 MB
Noise levelKnown for oneUnknown — not stated by the source48.8 dB
Mean time between failures (MTBF)Differs300000 h162303 h
Power1 differ
Redundant power supply (RPS) supportKnown for oneUnknown — not stated by the sourceYes
Power consumption (typical)Differs85 W71.5 W
Power sourceKnown for oneAC/DCUnknown — not stated by the source
Other features2 differ
LatencyKnown for oneUnknown — not stated by the source1G
Dimensions (WxDxH)Differs440 x 440 x 44.5 mm440 x 205 x 43 mm
BandwidthKnown for oneUnknown — not stated by the source96 Gbit/s
Expansion slotsKnown for oneUnknown — not stated by the source4 x SFP
Electromagnetic emissionsDiffersEN55022 class A, FCC class A,VCCI class ACE mark, EN 55022 Class A, EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick
Technical featuresKnown for oneUnknown — not stated by the source- RFC 1157, 1902-1907 - RFC 768 UDP - UDP Relay - RFC 854-859 Telnet - RFC 951 BOOTP - RFC 1213 MIB II - RFC 1757 RMON groups 1,2,3,9 - RFC 1215 SNMP Traps - RFC 1493 Bridge MIB - RFC 1643 Ethernet Interface MIB - RFC 1534 DHCP and BOOTP interoperation - RFC 2131, 2132 DHCP and BOOTP - RFC 2865 RADI
Authentication methodKnown for oneTACACS+, RADIUSUnknown — not stated by the source
Power requirementsKnown for one100-240V +/-10%, 47-63Hz; 40-60VUnknown — not stated by the source
Size (imperial)Known for one48.3 cm (19")Unknown — not stated by the source
Electromagnetic immunityKnown for oneEN55024, EN61000-3-2/3Unknown — not stated by the source
Operational conditions6 differ
Operating temperature (T-T)Differs0 - 50 °C0 - 55 °C
Storage temperature (T-T)Differs-25 - 70 °C-20 - 70 °C
Operating relative humidity (H-H)Differs5 - 80%0 - 90%
Storage relative humidity (H-H)Differs5 - 95%0 - 95%
Operating altitudeDiffers0 - 3050 m0 - 3000 m
Heat dissipationDiffers290 BTU/h244.101 BTU/h
Weight & dimensions1 differ
WeightDiffers7.1 kg4.15 kg
Packaging dataidentical
Package widthKnown for one530 mmUnknown — not stated by the source
Package depthKnown for one580 mmUnknown — not stated by the source
Package heightKnown for one145 mmUnknown — not stated by the source
Certificatesidentical
CertificationKnown for oneUL, cUL,TUV RoHS NEBSUnknown — not stated by the source

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More network switch comparisons

All network switch comparisons