Product comparison · 2 laminators

Fellowes Calibre A3 vs HP OneLam Combo A3

22specifications compared
11differ
11identical
19known for one product only

Key differences

The HP OneLam Combo A3 has 1 cm more maximum lamination width than the Fellowes Calibre A3 (33 cm vs 32 cm). The Fellowes Calibre A3 has 100 mm/min more lamination speed than the HP OneLam Combo A3 (500 mm/min vs 400 mm/min). The Fellowes Calibre A3 has 1.66 A more current than the HP OneLam Combo A3 (3.4 A vs 1.74 A). Type: Cold laminator on the Fellowes Calibre A3, Hot laminator on the HP OneLam Combo A3. Maximum document thickness: 12.5 cm on the Fellowes Calibre A3, 0.5 mm on the HP OneLam Combo A3.

Type
- Calibre A3:Cold laminator
- OneLam Combo A3:Hot laminator
Maximum lamination width
- Calibre A3:32 cm
- OneLam Combo A3:33 cm
Lamination speed
- Calibre A3:500 mm/min
- OneLam Combo A3:400 mm/min
Maximum document thickness
- Calibre A3:12.5 cm
- OneLam Combo A3:0.5 mm
AC input frequency
- Calibre A3:50 - 60 Hz
- OneLam Combo A3:50 Hz
Current
- Calibre A3:3.4 A
- OneLam Combo A3:1.74 A
Width
- Calibre A3:569.9 mm
- OneLam Combo A3:460 mm
Depth
- Calibre A3:155.6 mm
- OneLam Combo A3:158 mm

Side by side

Differences highlightedShow differences only

Comparison of Calibre A3, OneLam Combo A3
41 specifications	A Fellowes Calibre A3 View product	B HP OneLam Combo A3 View product
Features4 differ
TypeDiffers	Cold laminator	Hot laminator
Maximum lamination widthDiffers	32 cm	33 cm
Preheating timeKnown for one	1 min	Unknown — not stated by the source
Lamination speedDiffers	500 mm/min	400 mm/min
Maximum document thicknessDiffers	12.5 cm	0.5 mm
Housing materialKnown for one	Plastic	Unknown — not stated by the source
Handle(s)Known for one	Yes	Unknown — not stated by the source
Auto power offKnown for one	Yes	Unknown — not stated by the source
Auto power off afterKnown for one	30 min	Unknown — not stated by the source
Reverse motor functionKnown for one	Yes	Unknown — not stated by the source
Minimum film thicknessKnown for one	Unknown — not stated by the source	75 µm
Maximum film thicknessKnown for one	Unknown — not stated by the source	125 µm
CutterKnown for one	Unknown — not stated by the source	Yes
Cutting systemKnown for one	Unknown — not stated by the source	Manual
Warm-up timeKnown for one	Unknown — not stated by the source	4 min
Temperature (max)Known for one	Unknown — not stated by the source	150 °C
Power2 differ
AC input frequencyDiffers	50 - 60 Hz	50 Hz
CurrentDiffers	3.4 A	1.74 A
Power consumption (typical)Known for one	Unknown — not stated by the source	400 W
Weight & dimensions4 differ
WidthDiffers	569.9 mm	460 mm
DepthDiffers	155.6 mm	158 mm
HeightDiffers	109.5 mm	115 mm
WeightDiffers	2.5 kg	1.65 kg
Packaging dataidentical
Package widthKnown for one	669.9 mm	Unknown — not stated by the source
Package depthKnown for one	161.9 mm	Unknown — not stated by the source
Package heightKnown for one	179.4 mm	Unknown — not stated by the source
Package weightKnown for one	3.4 kg	Unknown — not stated by the source
Packaging content1 differ
Number of laminator pouchesDiffers	10	15
Logistics dataidentical
Harmonized System (HS) codeKnown for one	84729080	Unknown — not stated by the source
Products per master (outer) caseKnown for one	2 pc(s)	Unknown — not stated by the source

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More laminator comparisons

All laminator comparisons