Product comparison · 2 internal solid state drives

Origin Storage 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT vs Origin Storage 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy

Add a product
  • 29specifications compared
  • 6differ
  • 23identical
  • 10known for one product only

Key differences

  • Read speed
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:500 MB/s
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:550 MB/s
  • Random read (100% span)
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:67000 IOPS
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:85000 IOPS
  • Random write (100% span)
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:15300 IOPS
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:39000 IOPS
  • Lithography
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:16 nm
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:20 nm
  • Power consumption (average)
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:4.74 W
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:5.9 W
  • Intel High Endurance Technology (HET)
    • 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT:No
    • 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy:Yes

Side by side

Differences highlightedShow differences only (off)
Comparison of 800GB EMLC 2.5IN PE 13GEN SATA READ INTENSIVE HOT-SWAP SSD KIT, 800GB EMLC 2.5in SATA SSD Incl. Hot-Swap Caddy
39 specifications
Features4 differ
SSD capacity800 GB800 GB
SSD form factor2.5"2.5"
InterfaceSerial ATA IIISerial ATA III
NVMeNoNo
Memory typeeMLCeMLC
NAND flash typeeMLC (Enterprise Multi Level Cell)eMLC (Enterprise Multi Level Cell)
Component forServer/workstationServer/workstation
Hardware encryptionYesYes
Security algorithms256-bit AES256-bit AES
Data transfer rate6 Gbit/s6 Gbit/s
Read speedDiffers500 MB/s550 MB/s
Write speed460 MB/s460 MB/s
Random read (100% span)Differs67000 IOPS85000 IOPS
Random write (100% span)Differs15300 IOPS39000 IOPS
Read latency55 µs55 µs
Write latency66 µs66 µs
LithographyDiffers16 nm20 nm
S.M.A.R.T. supportYesYes
TRIM supportYesYes
End-to-End Data ProtectionYesYes
Enhanced Power Loss Data Protection technologyYesYes
Native Command Queuing (NCQ)YesYes
SSD temperature monitoringYesYes
IEEE 1667Known for oneYesUnknown — not stated by the source
Mean time between failures (MTBF)Known for one2000000 hUnknown — not stated by the source
Opal SSC 2.0Known for oneYesUnknown — not stated by the source
Power1 differ
Power consumption (average)Differs4.74 W5.9 W
Power consumption (idle)Known for oneUnknown — not stated by the source0.6 W
Brand-specific features1 differ
Intel High Endurance Technology (HET)DiffersNoYes
Intel® Smart Response TechnologyKnown for oneNoUnknown — not stated by the source
Weight & dimensionsidentical
Width69.8 mm69.8 mm
Depth100.5 mm100.5 mm
Height7 mm7 mm
Weight88 g88 g
Operational conditionsidentical
Operating vibrationKnown for one1000 GUnknown — not stated by the source
Non-operating vibrationKnown for one1000 GUnknown — not stated by the source
Operating shockKnown for one1000 GUnknown — not stated by the source
Non-operating shockKnown for one1000 GUnknown — not stated by the source
Operating relative humidity (H-H)Known for oneUnknown — not stated by the source5 - 95%

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More internal solid state drive comparisons

All internal solid state drive comparisons