Product comparison · 2 drills

AEG BS 14C vs AEG BSB 12G2

20specifications compared
12differ
8identical
6known for one product only

Key differences

The AEG BS 14C has 0.3 cm more chuck capacity (max) than the AEG BSB 12G2 (1.3 cm vs 1 cm). The AEG BS 14C has 50 RPM more idle speed (1st gear) than the AEG BSB 12G2 (400 RPM vs 350 RPM). The AEG BS 14C has 150 RPM more idle speed (2nd gear) than the AEG BSB 12G2 (1500 RPM vs 1350 RPM).

Chuck capacity (max)
- BS 14C:1.3 cm
- BSB 12G2:1 cm
Idle speed (1st gear)
- BS 14C:400 RPM
- BSB 12G2:350 RPM
Idle speed (2nd gear)
- BS 14C:1500 RPM
- BSB 12G2:1350 RPM
Torque settings
- BS 14C:23
- BSB 12G2:24
Maximum torque (hard applications)
- BS 14C:50 N⋅m
- BSB 12G2:30 N⋅m
Drilling diameter in wood (max)
- BS 14C:4.5 cm
- BSB 12G2:3 cm
Drilling diameter in steel (max)
- BS 14C:1.3 cm
- BSB 12G2:1 cm
Screw diameter (max)
- BS 14C:1.3 cm
- BSB 12G2:1 cm

Side by side

Differences highlightedShow differences only

Comparison of BS 14C, BSB 12G2
26 specifications	A AEG BS 14C View product	B AEG BSB 12G2 View product
Featuresidentical
Chuck typeKnown for one	Keyless	Unknown — not stated by the source
Built-in lightKnown for one	Yes	Unknown — not stated by the source
Hammer drillingKnown for one	Unknown — not stated by the source	Yes
Performance8 differ
Chuck capacity (min)Known for one	1.5 mm	Unknown — not stated by the source
Chuck capacity (max)Differs	1.3 cm	1 cm
Idle speed (1st gear)Differs	400 RPM	350 RPM
Idle speed (2nd gear)Differs	1500 RPM	1350 RPM
Torque settingsDiffers	23	24
Maximum torque (hard applications)Differs	50 N⋅m	30 N⋅m
Drilling diameter in wood (max)Differs	4.5 cm	3 cm
Drilling diameter in steel (max)Differs	1.3 cm	1 cm
Screw diameter (max)Differs	1.3 cm	1 cm
Power3 differ
Battery capacityDiffers	2 Ah	1.4 Ah
Battery voltageDiffers	14.4 V	12 V
Charging timeDiffers	30 min	60 min
Weight & dimensions1 differ
DepthKnown for one	186 mm	Unknown — not stated by the source
WeightDiffers	1.7 kg	1.5 kg
Other featuresidentical
Vibration emissionKnown for one	Unknown — not stated by the source	1.5 m/s²

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More drill comparisons

All drill comparisons