Product comparison · 2 bridges & repeaters

LevelOne WAB-2000H bridge/repeater 100 Mbit/s vs LevelOne WBA-4000 bridge/repeater 108 Mbit/s

Add a product
  • 5specifications compared
  • 4differ
  • 1identical
  • 13known for one product only

Key differences

  • Maximum data transfer rate
    • WAB-2000H bridge/repeater 100 Mbit/s:100 Mbit/s
    • WBA-4000 bridge/repeater 108 Mbit/s:108 Mbit/s
  • Dimensions (WxDxH)
    • WAB-2000H bridge/repeater 100 Mbit/s:235 x 210 x 76.2 mm
    • WBA-4000 bridge/repeater 108 Mbit/s:320 x 310 x 48 mm

Side by side

Differences highlightedShow differences only (off)
Comparison of WAB-2000H, WBA-4000
18 specifications
Data transmission1 differ
Maximum data transfer rateDiffers100 Mbit/s108 Mbit/s
Antennaidentical
Antenna connector typeKnown for oneUnknown — not stated by the sourceN-type
Antenna gain level (max)Known for one5 dBiUnknown — not stated by the source
Wireless LAN featuresidentical
Channels quantityKnown for oneUnknown — not stated by the source9 channels
ModulationKnown for oneUnknown — not stated by the sourceBPSK, QPSK
Network1 differ
Networking standardsDiffersIEEE 802.11a, IEEE 802.11b, IEEE 802.11gIEEE 802.11a
Ports & interfaces1 differ
I/O portsDiffers1 x 10/100 Mbps WAN 1 x LAN port1 x 10/100 Mbps Auto-MDIX RJ-45
Connectivity technologyKnown for oneWiredUnknown — not stated by the source
Securityidentical
MAC address filteringYesYes
Security algorithmsKnown for oneWPA, WPA-PSK, WPA2Unknown — not stated by the source
Management featuresidentical
Management platformKnown for oneUnknown — not stated by the sourceSNMP v2c
Management protocolsKnown for oneSNMP v1, v2, v3Unknown — not stated by the source
Poweridentical
Power over Ethernet (PoE)Known for oneUnknown — not stated by the sourceYes
Certificatesidentical
SafetyKnown for oneUnknown — not stated by the sourceIP-68
CertificationKnown for oneUnknown — not stated by the sourceFCC, CE
Weight & dimensions1 differ
Dimensions (WxDxH)Differs235 x 210 x 76.2 mm320 x 310 x 48 mm
WeightKnown for one2.5 kgUnknown — not stated by the source
Featuresidentical
Connectivity LEDsKnown for oneWAN, WLANUnknown — not stated by the source

A dash means the value is not stated by the source. Unknown values are never counted for or against a product, and there is no overall score.

More bridges & repeaters comparisons

All bridges & repeaters comparisons